Page 1
eSATA II ExpressCard Quick Installation Guide Introducing the eSATA II ExpressCard The eSATA II ExpressCard is an ultra high-speed dual channel Serial ATA Generation 2 controller. Features and Benefits • Adds two eSATA (external Serial ATA) ports • Supports data transfer speeds up to 3.0 Gbps (300MBps) •...
Package Contents • eSATA II ExpressCard • Driver CD • This quick installation guide Layout eSATA Connectors Figure 1: eSATA II ExpressCard Hardware Installation General instructions for installing the card are provided below. Since the design of systems may vary, refer to your system’s reference manual for further information, if needed.
Driver Installation This section provides information on how to install the eSATA II ExpressCard drivers for the following operating systems: Windows 2000 Install the board and boot up Windows 2000. At the Found New Hardware Wizard, click Next. Select Search for a suitable driver for my device (recommended) and click Next.
To Verify Windows 2000/XP/2003 Installation Right click My Computer and click Manage. Select Device Manager. Double click SCSI and RAID Controllers, then double click Silicon Image SiI 3132 ... Controller to display driver properties. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed.
A lifetime manufacturer warranty supplied with this product is offered by SIIG, Inc. Please see SIIG website for more warranty details. If you should happen to encounter any problems with this product, please follow the procedures below.
Page 6
Fremont, CA 94538-3152 eSATA II ExpressCard is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.