SIIG SATA II PCIe RAID Quick Installation Manual page 23

Advanced RAID Features: When this feature is selected
and the user selects to create RAID group, if the RAID
group to be created is fault tolerant group (RAID1), the
user will be able to select Improper Shutdown Policy in
the Create RAID Group dialog box. The Advanced RAID
Features are not supported for Legacy RAID groups.
Resources Info Support: When this feature is selected,
Resources menu item will be available under the Window
menu. This feature is for debugging purpose only.
Device Menu Commands
Create Spare and Delete Spare
This command displays a dialog box to let the user create
or delete a spare drive. This feature is not used with the
SATA II PCIe RAID.
Delete Member (see Advanced Options)
This command displays a dialog box to let the user
choose RAID groups' members to delete. Since RAID 0 is
not fault-tolerant, RAID 0 members will not be shown in
the list.
Delete Orphan
An orphan device segment is part of a RAID group that
cannot access another device segment within the same
RAID group. When a member of a RAID group fails (such
as a loss of power or a complete hard disk failure), it
becomes an orphan. This command displays the Delete
Orphan Segment window to show all orphan segments
and allows the user to delete selected orphan segments.
Device Summary
This command displays the Segment Summary window
to show all physical devices' segments.
23