Table of Contents
Advertisement
6.
Select Silicon Image SiI 3132 SoftRaid5
Controller..., then click Next.
7.
Follow the on-screen instructions to complete
Windows Vista operating system installation.
When Windows installation completes, go to SATARaid5
GUI on page 19 and install the RAID utility.
For An Existing Installation
1.
Setup the RAID array prior to driver installation and
boot up to Windows.
2.
At the Found New Hardware window, click Locate
and install the driver automatically (recommended).
3.
Insert the driver CD, click Continue.
4.
Click Next, then Close to complete the installation.
When Windows resumes, go to SATARaid5 GUI on
page 19 and install the RAID utility.
To Verify Windows Vista Installation
1.
Right click Computer, click Manage, click Continue,
select Device Manager.
2.
Double click Storage controllers, then double click
Silicon Image Sil 3132 SoftRaid 5 Controller to
display driver properties. A message This device is
working properly is displayed in the dialog box, the
driver has been correctly installed.
Windows XP / Server 2003 (32-bit )
For A New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents
of the 32bit folder, found on the driver CD, onto a blank
floppy disk then follow the directions in the next page.
14
Advertisement
Table of Contents
