SIIG SATA II PCIe RAID Quick Installation Manual page 12

5. For 32-bit system: Type D:\32bit, then click Next.
(Change D: to match your CD-ROM drive letter)
For 64-bit system: Type D:\64bit, then click Next.
(Change D: to match your CD-ROM drive letter)
6. Click Close to complete the installation.
When Windows resumes, go to SATARaid5 GUI on
page 19 and install the RAID utility.
To Verify Windows 7 Installation
1. Right click Computer, click Manage, select Device
Manager.
2. Double click Storage controllers, then double click
Silicon Image Sil 3132 SoftRaid 5 Controller to
display driver properties. A message This device is
working properly is displayed in the dialog box, the
driver has been correctly installed.
Windows Server 2008
For A New Installation
1. Setup the RAID array prior to Windows installation.
2. Follow Windows installation procedure.
3. At Where do you want to install Windows?, click
Load Driver.
4. Insert the driver CD, click Browse.
5. Double click your CD-ROM drive,
For 32-bit Server 2008 select 32bit, then click OK.
For 64-bit Server 2008: select 64bit, then click OK.
6. Select Silicon Image SiI 3132 SoftRaid5
Controller..., then click Next.
7. Follow the on-screen instructions to complete
Windows Server 2008 operating system installation.
12