Table of Contents
Advertisement
Quick Links
Introducing the Data Security PCI-64
The Data Security PCI-64 is an affordable DES (64-bit) real-time
hardware data encryption/decryption solution for your data
protection.
Features and Benefits
• Equipped with National Institute of Standards and
Technology (NIST) certified DES (64-bit) real-time
encryption/decryption hardware engine
• Capable of maneuvering 1.1 Gbps throughput without taking
extra CPU time and system resources
• An affordable real-time encryption/decryption solution
encrypts the entire hard drive contents including boot sector
and operation system without performance degradation
• All disk write (encryption) and disk read (decryption)
operations are completely transparent to users
• Two personal security keys included for authentication
• Works with various brands of Ultra ATA 133/100/66/33
hard disk drives and achieves data transfer rates up to
100 MB/sec
System Requirements
• Pentium or equivalent PC with an available PCI slot
• On-board or add-on UltraATA (IDE) controller
• Windows 98/98 SE/ME/NT 4.0/2000/XP
Package Contents
• (1) Data Security PCI-64 board
• (2) Security Keys (identical)
• (1) 40-pin/80-wire Ultra ATA cable
• This quick installation guide
04-0271A
Data Security PCI-64
Quick Installation Guide
1
Advertisement
Table of Contents
Related Manuals for SIIG SC-SE6412
Summary of Contents for SIIG SC-SE6412
- Page 1 Data Security PCI-64 Quick Installation Guide Introducing the Data Security PCI-64 The Data Security PCI-64 is an affordable DES (64-bit) real-time hardware data encryption/decryption solution for your data protection. Features and Benefits • Equipped with National Institute of Standards and Technology (NIST) certified DES (64-bit) real-time encryption/decryption hardware engine •...
-
Page 2: Board Layout
Board Layout Hard disk drive IDE Controller Connector Connector Security Key Slot Activity Buzzer Sticker Figure 1. Board Layout Default Jumper Settings Figure 2. Default Jumper Settings... -
Page 3: Installation
Jumper Setting Configurations Disable Encrypt/Decrypt Enable Encrypt/Decrypt (Default) Slave Master (Default) Figure 3. Jumper Setting Configurations Installation This Data Security PCI-64 only supports one secured hard disk drive. Do not connect two hard disk drives to this controller. The hard disk drive connected to this controller is only available if the Security Key is inserted during boot process. - Page 4 4. The red LED below the security key slot indicates the Security Key is not inserted into the security key slot during system boot up. 5. The green LED below the security key slot indicates power input. Configuring the Hard Disk Drive 1.
- Page 5 Connecting the Hard Disk Drive 1. Connect one end of the provided IDE cable to the IDE Controller Connector (see figure 1) on the Data Security PCI-64. Connect the other end to the IDE controller on the motherboard or an add-on IDE controller card. 2.
-
Page 6: Technical Support
RMA number posted on the outside of the shipping carton. Step 3: Ship the Product You are responsible for the cost of shipping back to SIIG at the following address: SIIG, Inc. - Page 7 Fremont, CA 94538-3152 Data Security PCI-64 is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.
- Page 8 Empty Page...