For An Existing Installation
1.
Setup the RAID array prior to driver installation and
boot up to Windows.
2.
At Found New Hardware Wizard, click Next.
3.
Select Search for a suitable driver for my device
(recommended), then click Next.
4.
Insert the driver CD, check CD-ROM drives, uncheck
the other boxes, click Next, click Next again, then
click Finish.
5.
Repeat steps 2-4.
6.
Restart Windows to complete the installation.
When Windows resumes, go to SATARaid5 GUI on
page 19 and install the RAID utility.
To Verify Windows 2000 / XP / 2003 Installation
1.
Right click My Computer, click Manage.
2.
Select Device Manager.
3.
Double click SCSI and RAID controllers, then
double click Silicon Image Sil 3132 SoftRaid 5
Controller to display driver properties. A message
This device is working properly is displayed in the
dialog box, the driver has been correctly installed.
18