Configuring The Network Adapter Card - Allied Telesis AT-2700FX Installation Manual

Configuring the Network Adapter Card

To configure the speed and duplex of the adapter, go to the following file
and configure the speed_duplex parameter to the desired value:
/kernel/drv/ae.conf
Possible values for the speed_duplex parameter are:
0 - Auto Negotiation
1 - 100Mb/half duplex
2 - 100Mb/full duplex
3 - 10Mb/half duplex
4 - 10Mb/full duplex
5 - Hardware
Note
Since a fiber optic port does not support Auto-Negotiation, the
setting "0" is inappropriate when configuring that type of port. To
configure a fiber optic port, select the appropriate speed and duplex
mode setting (1 to 4).
Network Adapter Card Installation Guide
131