Leds - Allied Telesis AT-2700FX Installation Manual

Chapter 1: Network Adapter Card Overview

LEDs

28
Table 6. AT-2700FTX and AT-2701FTX Series Network Adapter
BootPROM Chip and MBA Feature
AT-2700FTX Series
AT-2701FTX Series
Default Port
Load Balancing and Fail-over Protection
AT-2700FTX Series
AT-2701FTX Series
1. Numerous factors, such as too many splices or poorly implemented splices,
can significantly reduce the maximum distance of a fiber optic port. Fiber optic
cable should only be installed by a qualified fiber optic cable contractor.
2. Microsoft Windows 2000, 2003, and XP.
Table 7 describes the LEDs on the AT-2700FTX and AT-2701FTX Series
adapter cards. The twisted pair port uses either the 10 or 100 LED,
depending on its operating speed. The fiber optic port uses just the 100
LED.
Table 7. AT-2700FTX and AT-2701FTX Series LEDs
LED
10
Cards (Continued)
Optional
Standard
100Base-FX
Not supported
Supported
Default setting: Disabled
Status
Green
Amber
Flashing
2
Description
The twisted pair port
is operating at 10
Mbps, full-duplex
mode.
The twisted pair port
is operating at 10
Mbps, half-duplex
mode.
The twisted pair port
is receiving or
transmitting network
packets at 10 Mbps.