Chapter 3: Microsoft Windows 2000, 2003, And Xp - Allied Telesis AT-2700FX Installation Manual

Chapter 3
Microsoft Windows 2000, 2003, and XP
This chapter contains instructions on how to install, update, and remove
the network adapter driver on a Microsoft Windows 2000, 2003, or XP
system. This chapter also contains the procedure for adjusting a network
adapter card's parameters, such as assigning an IP address and changing
port speed and duplex mode. Procedures in the chapter include:
"Choosing a Network Adapter Card Driver" on page 58
"Installing or Updating a Driver Using the AT-Setup Utility" on page 59
"Creating a Driver Installation Disk" on page 68
"Manually Installing a Driver" on page 73
"Manually Updating a Driver" on page 77
"Removing a Driver" on page 85
"Running AT-Setup to Complete Driver Installation" on page 90
"Configuring the Network Adapter Card Settings" on page 91
57