Allied Telesis AT-2700FX Installation Manual page 54

Chapter 2: Installing a Network Adapter Card
54
6. Gently insert the network adapter card into the PCI slot. Make sure the
card is securely seated.
Figure 8. Inserting the Network Adapter Card
7. Secure the network adapter card to the chassis with a Phillips-head
screw, not provided.
Figure 9. Securing the Adapter Card
8. To use the Wake on LAN feature in a PCI 2.1-compatible system,
connect the other end of the Wake on LAN cable to the Wake on LAN
connector on the system's motherboard. Refer to the system's
documentation for the location of the connector. If you are installing
the card in a PCI 2.2-compliant system or do not want to use the Wake
on LAN feature, skip this step.
9. Replace the system's cover and secure it with the screws removed in
Step 2.
10. Connect the network adapter card to the network by connecting the
appropriate network cable.