Allied Telesis AT-2700FX Installation Manual page 144

Chapter 8: AT-Stat Utility
144
Table 12 defines the information in the General tab
Field
TCP/IP
IP Address
Subnet Mask
Gateway
DHCP
MAC Address
Table 12. General Tab
Description
Displays the IP address assigned to the
adapter. For instructions on how to
manually assign an IP address or activate
the DHCP client software, refer to
"Configuring the IP Address, Subnet
Mask, and Gateway Address" on page 92.
Note
The AT-Stat utility might not display
an IP address and subnet mask if
the port on the adapter has not
established an active link with the
remote device.
Displays the subnet mask assigned to the
adapter.
Specifies the IP address of a default
gateway router.
Displays whether the DHCP client has
been activated on the network adapter
card. Possible values are:
Enabled - The DHCP client software is
active and the adapter is getting its IP
configuration from a DHCP or BOOTP
server.
Disabled - The DHCP client software is
inactive. The IP configuration must be set
manually.
For information on how to activate the
DHCP client software, refer to
"Configuring the IP Address, Subnet
Mask, and Gateway Address" on page 92.
Displays the adapter's MAC address.