Using The At-Stat Utility; Starting The At-Stat Utility - Allied Telesis AT-2700FX Installation Manual

Chapter 8: AT-Stat Utility

Using the AT-Stat Utility

Starting the
AT-Stat Utility
142
The AT-Stat utility displays basic information and operating statistics on
Allied Telesyn network adapter cards installed in Windows 2000, 2003,
and XP systems.
In order to use the AT-Stat utility, you must install it on your system. You
cannot run the utility from the Installation CD. For installation instructions,
refer to "Installing the AT-Stat Utility" on page 134.
To start the utility, select Allied Telesyn ATStat from the Programs menu
of the Start menu, as shown in Figure 83.
Figure 83. Starting the AT-Stat Utility
The utility's interface consists of five tabs: General, Statistics, Ping,
NetCheck, and Support. The tabs are described in the following sections:
"General Tab" on page 143
"Statistics Tab" on page 147
"Ping Tab" on page 150
"NetCheck Tab" on page 151
"Support Tab" on page 152