Allied Telesis AT-2700FX Installation Manual page 166

Chapter 9: AT-MUX Multiple VLAN Protocol
166
Note
If you are using the Allied Telesyn Installation CD and the CD
interface window opens, close or minimize the window.
7. Use the Browse button or manually enter the drive letter and location
of the AT-MUX protocol files. If you are using the Installation CD, the
files are stored in the \drivers\AT-Mux subdirectory.
8. Select OK.
The Select Network Protocol window is displayed again, this time with
the AT-MUX protocol, as shown in Figure 100.
Figure 100. Select Network Protocol Window
Note
You may see the statement "This Driver Not Digitally Signed" and
error messages concerning the Windows logo. You can ignore these
messages. Allied Telesyn is in the process of digitally signing the
AT-MUX protocol but was unable to complete the process before
release of this installation guide.