2914 Series Fiber Network Adapters with WoL Installation and User's Guide
Configuring the VLAN and Priority Settings on the Network Adapter
60
You can specify or modify the VLAN and Priority settings on the
AT-2914GP/SP adapter through the CLI. See Table 4.
Table 4. VLAN and Priority Settings
Item
Device name
FW
VLAN and Priority Settings:
VLAN Tagging
PoE VID
PoE QoS
PC VID
PC QoS
VLAN and Priority Setting Commands:
1
2
3
4
5
6
7
Description
Displays the network adapter name.
Displays the current console firmware revision.
Displays the current tagging status. The options
are enabled or disabled. The default is disabled.
Displays the VLAN ID for the PoE copper port. The
default is 0. The range is 0 to 4095.
Displays QoS priority level for the PoE copper port.
The default is 0. The range is 0 to 7.
Displays the VLAN ID for the PC traffic. The default
is 0.
Displays the QoS priority level for the PC traffic.
The default is 0.
Enable VLAN tagging.
Disable VLAN tagging.
Change the VLAN ID for the PoE copper port.
Change the QoS priority level for the PoE copper
port.
Change the VLAN ID for the PC traffic.
Change the QoS priority level for the PC traffic.
Saves and Applies the VLAN settings.