Allied Telesis AT-2700FX Installation Manual page 23

Table 4. AT-2700FX and AT-2701FX Series Network Adapter
Type of Cabling
Operating Specifications
Wake on LAN Feature
AT-2700FX Series
AT-2701FX Series
Default Setting
BootPROM Chip and MBA Feature
AT-2700FX Series
AT-2701FX Series
Load Balancing and Fail-over Protection
AT-2700FX Series
AT-2701FX Series
1. Numerous factors, such as too many splices or poorly implemented splices,
can significantly reduce the maximum distance of a fiber optic port. Fiber optic
cable should only be installed by a qualified fiber optic cable contractor.
2. Microsoft Windows 2000, 2003, and XP.
Network Adapter Card Installation Guide
Cards (Continued)
50/125 or 62.5/125 micron (core/
cladding) multimode fiber optic
cable
Wavelength: 1310 nm
Output power - 50/125 micron
cabling:
Minimum: -22.5 dBm
Maximum: -14 dBm
Output power - 62.5/125 micron
cabling:
Minimum: -19.0 dBm
Maximum: -14 dBm
Input sensitivity:
Minimum: -31 dBm
Maximum: -14 dBm
Supported
Supported
Disabled
Optional
Standard
Not supported
2
Supported
Default setting: Disabled
23