Unpacking The Network Adapter - Allied Telesis 29M2/SP-BA Installation And User Manual

Unpacking the Network Adapter

To unpack the network adapter, perform the following procedure:
1. Remove all components from the shipping boxes.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all components listed in Table 2 are included in your
shipping boxes.
Table 2. Components in the Shipping Boxes
Name
SFP board
Controller board
Ribbon cable
Spacer
SFP mount screws
M.2 screw
Chapter 2: Installing the Hardware
Component
23