Chapter 10: At-Diag Utility - Allied Telesis AT-2700FX Installation Manual

Chapter 10
AT-Diag Utility
The AT-Diag utility is used to configure the speed and duplex mode of an
adapter port, enable and disable the BootPROM chip and Managed Boot
Agent, and test the adapter. Sections in this chapter include:
❑ "Starting the AT-Diag Utility" on page 176
❑ "Diagnostics Tests Option" on page 179
❑ "Communications Test Option" on page 181
❑ "Hardware Information Option" on page 183
❑ "Settings Option" on page 184
❑ "Select Adapter Option" on page 186
❑ "Technical Support Option" on page 187
175