Allied Telesis AT-2700FX Installation Manual page 52

Chapter 2: Installing a Network Adapter Card
52
3. Select an empty, non-shared PCI slot and remove the faceplate. Keep
the faceplate in a safe place. You may need it for future use. See
Figure 6.
Figure 6. Removing the Faceplate From PCI Slot
If you are installing the network adapter card in a PCI 2.1-compliant
system and want to use the Wake on LAN feature, choose a slot that is
near the Wake on LAN connector on the system's motherboard. This
will make installing the Wake on LAN cable easier.
Note
If you cannot locate or know how to find an PCI slot, refer to the
documentation that came with your system.
4. Remove the network adapter card from the shipping package and
store the packaging material in a safe location.
Caution
Wear a grounding device and observe electrostatic discharge
precautions when installing the network adapter card in a system.
Failure to observe this caution could result in damage to the card.