Chapter 9: AT-MUX Multiple VLAN Protocol
Installing the AT-MUX Protocol
162
This procedure explains how to install the AT-MUX protocol on a Microsoft
Window 2000, 2003, or XP system.
If the system does not have a CD drive, you can copy the files in the
\drivers\AT-Mux directory on the Installation CD into the root directory
of a blank, formatted diskette, and use the diskette in place of the
Installation CD during this procedure.
Note
For systems with more than one Allied Telesyn network adapter
card, you must install the AT-MUX protocol on each card where
multiple VLAN support is desired.
To install the AT-MUX protocol, perform the following procedure:
1. From the desktop, right-click the My Network Places icon and select
Properties from the menu, as shown in Figure 93.
Figure 93. My Network Places Icon Menu