Allied Telesis AT-2700FX Installation Manual page 18

Chapter 1: Network Adapter Card Overview
18
Table 2. AT-2450FTX and AT-2451FTX Series Network Adapter
Type of Cabling
Wiring Configuration
Fiber Optic Port
Standard
Speed
Duplex Mode
Type of Connector
Maximum Operating Distance
Type of Cabling
Operating Specifications
Cards (Continued)
10Base-T operation:
Category 3 or better 100 ohm
shielded or unshielded twisted
pair cable
100Base-TX operation:
Category 5 or better 100 ohm
shielded or unshielded twisted
pair cable
MDI
10Base-FL
10 Mbps
Half- or full-duplex
(Default: Full-duplex)
AT-2450FTX/SC - duplex SC
AT-2450FTX/ST - duplex ST
AT-2451FTX/SC - duplex SC
AT-2451FTX/ST - duplex ST
2 kilometers (1.2 miles)
1
50/125 or 62.5/125 micron (core/
cladding) multimode fiber optic
cable
Wavelength: 820 nm
Output power - 50/125 micron
cabling:
Minimum: -18.8 dBm
Maximum: -13.8 dBm
Output power - 62.5/125 micron
cabling:
Minimum: -15.0 dBm
Maximum: -10.0 dBm
Input sensitivity:
Typical: -4.4 dBm