Allied Telesis AT-2700FX Installation Manual page 139

9. Configure the window as follows:
To change the location where the utility will be stored on the
system, enter the driver and path in the Folder field, or use the
Browse button to specify a location. The default folder is Program
Files\Allied Telesyn\ATStat. To view the disk drives on the system
and the available storage space, use the Disk Cost button.
If the system has multiple user accounts and you want to limit use
of the utility to just the current account, click Just Me. If you want
all of the system's user accounts to have access to the program,
click Everyone.
10. Click Next.
The installation program displays the confirmation window shown in
Figure 81.
Figure 81. AT-Stat Installation Window (3 of 4)
11. Click Next.
Network Adapter Card Installation Guide
139