Allied Telesis AT-2700FX Installation Manual page 89

5. Right-click on the adapter driver you want to remove and select either
Remove or Uninstall from the pop-up menu, as shown in Figure 49.
Figure 49. Uninstall Menu Selection
A confirmation window is displayed.
Figure 50. Confirm Device Removal Window
6. Select OK.
If you intend to remove the adapter card from the system, go to the
next step. If you removed the adapter driver with the intent of replacing
it with another driver (for example, if you are replacing the regular
adapter driver with the LBFO driver), some additional steps might be
required, depending on the operating system. For instance, on a
Microsoft Windows XP system you might need to delete OEM.INF and
OEM.PNF files from the \WINDOWS\INF system folder before you can
load the new driver. For further information, refer to the documentation
included with the system.
7. Shutdown the Microsoft Windows operating system and power OFF
the system.
8. Remove the network adapter card from the system. For instructions,
refer to the documentation that came with your computer.
9. Power ON your computer.
This completes the procedure for removing a driver and network
adapter card from a system.
Network Adapter Card Installation Guide
89