Figure 31-1 Menu 11.1 Remote Node Profile; Figure 31-2 Menu 11.3 Remote Node Network Layer Options - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide
Rem Node Name= ?
Active= Yes
Encapsulation= ENET ENCAP
Multiplexing= VC-based
Service Name= N/A
Incoming:
Outgoing:
Step 2. Move the cursor to the Edit IP/Bridge field, then press [SPACE BAR] to set the value to Yes
and press [ENTER] to edit Menu 11.3 – Remote Node Network Layer Options.
IP Options:
IP Address Assignment= Static
Rem IP Addr: 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:

Figure 31-2 Menu 11.3 Remote Node Network Layer Options

31-2
Menu 11.1 - Remote Node Profile
Rem Login= N/A
Rem Password= N/A
My Login= N/A
My Password= N/A
Authen= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 31-1 Menu 11.1 Remote Node Profile

Menu 11.3 - Remote Node Network Layer Options
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set=2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies=
Route= IP
Bridge= Yes
Edit IP/Bridge= No
Edit ATM Options= No
Edit Advance Options= N/A
Telco Option:
Allocated Budget(min)= N/A
Period(hr)= N/A
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= N/A
Bridge Options:
Ethernet Addr Timeout (min)= 0
Bridging Setup