Configuring Address Mapping; Table 9-5 Edit Sua/Nat Server Set - ZyXEL Communications Prestige 652H series User Manual

LABEL
Start Port No. Enter a port number in this field.
To forward only one port, enter the port number again in the End Port No. field.
To forward a series of ports, enter the start port number here and the end port number
in the End Port No. field.
End Port No. Enter a port number in this field.
To forward only one port, enter the port number again in the Start Port No. field above
and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the Start Port No. field above.
Server IP Enter your server IP address in this field.
Address
Save Click Save to save your changes back to the Prestige.
Click Cancel to return to the previous configuration.
Cancel
9.6

Configuring Address Mapping

Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a
rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are
ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed up
by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current set
and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9. Now if
you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and
6.
To change your Prestige's address mapping settings, click NAT, Select Full Feature and click Edit Details
to open the following screen.
NAT

Table 9-5 Edit SUA/NAT Server Set

Prestige 652H/HW Series User's Guide
DESCRIPTION
9-9