Table 16-12 Telecommuters Sharing One Vpn Rule Example - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide

Table 16-12 Telecommuters Sharing One VPN Rule Example

FIELDS
My IP Address:
Secure Gateway
IP Address:
Local IP Address:
Remote IP
Address:
16.17.2 Telecommuters Using Unique VPN Rules Example
In this example the telecommuters (A, B and C in the figure) use IPSec routers with domain names that are
mapped to their dynamic WAN IP addresses (use Dynamic DNS to do this).
With aggressive negotiation mode (see section 16.11.1), the Prestige can use the ID types and contents to
distinguish between VPN rules. Telecommuters can each use a separate VPN rule to simultaneously access a
Prestige at headquarters. They can use different IPSec parameters. The local IP addresses (or ranges of
addresses) of the rules configured on the Prestige at headquarters can overlap. The local IP addresses of the
rules configured on the telecommuters' IPSec routers should not overlap.
See the following table and figure for an example where three telecommuters each use a different VPN rule
for a VPN connection with a Prestige located at headquarters. The Prestige at headquarters (HQ in the figure)
identifies each incoming SA by its ID type and content and uses the appropriate VPN rule to establish the
VPN connection.
The Prestige at headquarters can also initiate VPN connections to the telecommuters since it can find the
telecommuters by resolving their domain names.
16-30
TELECOMMUTERS
0.0.0.0 (dynamic IP address
assigned by the ISP)
Public static IP address
Telecommuter A: 192.168.2.12
Telecommuter B: 192.168.3.2
Telecommuter C: 192.168.4.15
192.168.1.10
HEADQUARTERS
Public static IP address
0.0.0.0 With this IP address only the
telecommuter can initiate the IPSec tunnel.
192.168.1.10
0.0.0.0 (N/A)
VPN Screens