Tcp/Ip Setup; Figure 28-3 Menu 5 Dmz Setup; Figure 28-4 Menu 5.2 Tcp/Ip Setup - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide

28.3 TCP/IP Setup

For more detailed information about RIP setup, IP Multicast and IP alias, please refer to the LAN chapter.
28.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
From menu 5, select the submenu option 2. TCP/IP Setup and press [ENTER]. The screen now displays
Menu 5.2: TCP/IP Setup
The TCP/IP setup fields are the same as the ones in Menu 3.2 TCP/IP Ethernet Setup. Each public server
will need a unique IP address. Refer to section 25.3 for information on how to configure these fields.
DMZ and LAN IP addresses must be on separate subnets.
You must also configure NAT for the DMZ port (see the NAT chapter) in menus 15.1
28-2
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:

Figure 28-3 Menu 5 DMZ Setup

,
as shown next.
TCP/IP Setup:
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Multicast= None
Press ENTER to Confirm or ESC to Cancel:

Figure 28-4 Menu 5.2 TCP/IP Setup

Menu 5.2 - TCP/IP Ethernet Setup
Version= N/A
and 15.2.
DMZ Setup