Prestige 652H/HW Series User's Guide
The following table describes the fields in this menu.
FIELD
Active
Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic redirect setup.
The default is No.
Configuration:
Backup
Enter the IP address of your backup gateway in dotted decimal notation.
Gateway IP
The Prestige automatically forwards traffic to this IP address if the Prestige's Internet
Address
connection terminates.
Metric
This field sets this route's priority among the routes the Prestige uses.
The metric represents the "cost of transmission". A router determines the best route for
transmission by choosing a path with the lowest "cost". RIP routing uses hop count as
the measurement of cost, with a minimum of "1" for directly connected networks. The
number must be between "1" and "15"; a number greater than "15" means the link is
down. The smaller the number, the lower the "cost".
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC] to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
24.4 Configuring Dial Backup Setup
From the main menu, enter 2 to open menu 2. Then move the cursor to the Dial Backup field in
Menu 2 - WAN Backup Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
24-4
Table 24-2 Menu 2.1Traffic Redirect Setup
DESCRIPTION
Menu 2 WAN Backup Setup