Configuring Advanced Wan Backup - ZyXEL Communications Prestige 652H series User Manual

LABEL
Dial Backup
Active
Metric
Port Speed
User Name
Password
Pri Phone #
Advanced Setup
Back
Apply
Cancel
8.9

Configuring Advanced WAN Backup

To edit your Prestige's advanced WAN backup settings, click WAN, WAN Backup and then the Advanced
Setup button. The screen appears as shown.
WAN Setup
Table 8-2 WAN Backup
Select this check box to turn on dial backup.
This field sets this route's priority among the three routes the Prestige uses
(normal, traffic redirect and dial backup). Type a number (1 to 15) to set the
priority of the dial backup route for data transmission. The smaller the number,
the higher the priority.
If the three routes have the same metrics, the priority of the routes is as follows:
WAN, Traffic Redirect, Dial Backup.
Use the drop-down list box to select the speed of the connection between the dial
backup port and the external device. Available speeds are: 9600, 19200, 38400,
57600, 115200 or 230400 bps.
Type the login name assigned by your ISP.
Type the password assigned by your ISP.
Type the first (primary) phone number from the ISP for this remote node. Some
areas require dialing the pound sign # before the phone number for local calls.
Include a # symbol at the beginning of the phone numbers as required.
Click this button to display the Advanced Setup screen and edit more details of
your WAN backup setup.
Click Back to return to the previous screen.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
Prestige 652H/HW Series User's Guide
DESCRIPTION
8-11