Advanced Dial Backup Setup; Figure 24-4 Menu 2.2.1 Advanced Dial Backup Setup; Table 24-4 Menu 2.2.1 Advanced Dial Backup Setup: At Commands Fields - ZyXEL Communications Prestige 652H series User Manual

Prestige 652H/HW Series User's Guide

24.5 Advanced Dial Backup Setup

Consult the manual of your WAN device connected to your Dial Backup port for
To edit the advanced setup for the dial backup port, move the cursor to the Edit Advanced Setup field in
Menu 2.2 Dial Backup Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
AT Command Strings:
Dial= atdt
Drop= ~~+++~~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT
The following table describes fields in this menu.

Table 24-4 Menu 2.2.1 Advanced Dial Backup Setup: AT Commands Fields

FIELD
AT Command Strings:
Dial Enter the AT Command string to make a call.
Drop Enter the AT Command string to drop a call. "~" represents a one second
Answer Enter the AT Command string to answer a call.
Drop DTR When
Hang Up
AT Response Strings:
24-6
specific AT commands.
Menu 2.2.1 - Advanced Dial Backup Setup
Press ENTER to Confirm or ESC to Cancel:

Figure 24-4 Menu 2.2.1 Advanced Dial Backup Setup

wait, e.g., "~~~+++~~ath" can be used if your modem has a slow
response time.
Press the [SPACE BAR] to choose either Yes or No. When Yes is
selected (the default), the DTR (Data Terminal Ready) signal is dropped
after the "AT Command String: Drop" is sent out.
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
DESCRIPTION EXAMPLE
Menu 2 WAN Backup Setup
atdt
+++ath
ata
YES