Remote Management Configuration
17.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which Prestige interface
(if any) from which computers.
When you configure remote management to allow management from the WAN, you
still need to configure a firewall rule to allow access. See the firewall chapters for
You may manage your Prestige from a remote location via:
When you Choose WAN only or ALL (LAN & WAN), you still need to configure a
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The Prestige automatically
disconnects a remote management session of lower priority when another remote management session of
higher priority starts. The priorities for the different types of remote management sessions are as follows.
1. Console port
2. Telnet
3. HTTP
17.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1. A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web
service.
Remote Management Configuration
This chapter provides information on configuring remote management.
details on configuring firewall rules.
Internet (WAN only)
LAN only,
firewall rule to allow access.
Prestige 652H/HW Series User's Guide
Chapter 17
ALL (LAN and WAN)
Neither (Disable).
17-1