Selecting The Nat Mode; Figure 9-4 Nat Mode; Table 9-4 Nat Mode - ZyXEL Communications Prestige 652H series User Manual

9.4

Selecting the NAT Mode

You must create a firewall rule in addition to setting up SUA/NAT, to allow traffic
Click NAT to open the following screen.
The following table describes the labels in this screen.
LABEL
None Select this radio button to disable NAT.
Select this radio button if you have just one public WAN IP address for your Prestige. The
SUA Only
Prestige uses Address Mapping Set 1 in the NAT - Edit SUA/NAT Server Set screen.
Edit Details Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Full Feature Select this radio button if you have multiple public WAN IP addresses for your Prestige.
Edit Details Click this link to go to the NAT - Address Mapping Rules screen.
Apply Click Apply to save your configuration.
NAT
from the WAN to be forwarded through the Prestige.

Figure 9-4 NAT Mode

Table 9-4 NAT Mode

Prestige 652H/HW Series User's Guide
DESCRIPTION
9-7