The following table describes the fields in this screen.
LABEL
IP Address
A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet. The
Single User Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Subnet Mask Enter a subnet mask in dotted decimal notation.
Refer to the IP Subnetting appendix to calculate a subnet mask If you are implementing
subnetting.
ENET ENCAP
You must specify a gateway IP address (supplied by your ISP) when you use ENET
Gateway
ENCAP in the Encapsulation field in the previous screen.
Network Address
Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
Translation
chapter for more details.
Wizard Setup
Figure 3-4 Internet Connection with ENET ENCAP
Table 3-4 Internet Connection with ENET ENCAP
Prestige 652H/HW Series User's Guide
DESCRIPTION
3-9