Print Setting - Mitsubishi CP710E Operation Manual

7. Setting the functions (Memory SW menu)
External remote terminal 1
1
BUSY 1
3 3 3 3 3

PRINT SETTING

PRN DIR ( Print Direction )
Function Selecting the print direction.
NML
REV
This function is available on S-size paper except 2-image print, PHOTO print (3*4,) and CARD
print, and also available on L-size paper of 2-image print and PHOTO (5*5, 3*3.5) print.
PRN SPEED ( Print Speed )
Function Selecting the print speed.
NML ( Normal )
FAST ................................ High speed
When setting to " FAST " , the color of printing image may be light.
MARGIN CUT
Function Cut the print paper so that the upper margin is small.
ON
OFF ................
This function is convenient when putting the print on prints on records or non-PVC sleeves for print
achieving. This feature also saves paper.
46
External remote terminal 2
2
BUSY 1 BUSY 2
Print setting 2
.......... The margin is made on the lower position.
.......... The margin is made on the upper position.
REV
.......... Normal speed
................ Small margin
Behind the margin
ON
• The signal defined in BUSY 1 is output from Remote terminal 1.
• The two signals defined in BUSY 1 and 2 are output from Remote
terminal 2.
• The individual definition is available in BUSY 1 and BUSY 2.
• Make the necessary signal definition.
• The active level signal in BUSY 2 will also be output at buzzing when
you set "REMAINING" function ( refer to next page).
NML
Margin cut
OFF