Table of Contents
Advertisement
9. Troubleshooting
Other messages
MECHA INITIALIZE REQUEST
MECHA INITIALIZE
PRINT STOP
*Note : 3
This is an operation for initialization. Make sure to press the MONITOR button first. If the MEMORY
button is pressed first, a new image will be stored in memory erasing any previously stored image.
Overcoming paper jams
1 Press the OPEN button to pull out the printing unit.
2 Push the ink cassette locking holder to unlock the ink cassette.
3 Remove the ink cassette.
4 Turn the knob on the right side of the printing unit clockwise.
•
Roll up the print paper completely.
5 Remove the print papr.
6 Cut the defective part of print paper with scissors.
7 Cut both edges of the print paper.
8 Install the print paper. (Refer to pages 5-6.)
68
Indicated when the power is turned on after turning off during printing.
Press the MEMORY button for more than on second while pressing the
MONITOR button. *Note : 3
Indicated during initializing.
In the case of pressing the STOP button on the remote control during
printing, this unit is initialized. This message is indicated during initializing.
3
Advertisement
Table of Contents
