Table of Contents
Advertisement
7. Setting the functions (Main menu)
Function
1 1 1 1 1 MAIN MENU
Open the sub-menu from Memory menu.
Items and setting displayed are shown below.
1.COLOR ADJ ....... Adjust color of printing image
2.SIGNAL SET ....... Selecting the input signal, reverse of odd and even field lines, automatic frequency control,
3.ADDITIONAL ....... Setting the number of images in a print, strobe print, photo print, separate print
4. PRINT ................. Selecting paper size, comment printing method, Adjusting image outline, Adjusting print image
5.COMMENT .......... Making a comment
6.SYSTEM .............. Setting print area and printing size, turn the memory page, buzzer sound
SAVE ..................... Storing the above setting in 3 kinds of memories.
SAVE
This menu is shown in the lowest position on the " MAIN MENU " .
Function
Operation
1. Press the SET button
• " SAVE " is displayed on the monitor screen indicated in red.
2. Press the RIGHT
3. Press the SET
• The set conditions display or the source image is displayed.
• As the program is replaced, it is recommended that the previous program number is not selected in step 2.
• Press the program button to select the memory 1,2, or 3 . The display according to each setting is displayed.
The setting cannot be changed during printing.
• The image can be printed according to the selected memory program.
30
e.g. Monitor display 1. COLOR ADJ
automatic gain control, separating composite video signal, etc.
density, mirror print (left/ right inverted)
Storing the setting value on the menu 1-6.
Store the setting of function on the sub menu 1-6 to program 1,2 and 3.
Set each function and then display MAIN MENU.
SET
.
or LEFT
SET
button to store the setting to the selected program number.
BRT
shift button to select the memory bank number 1, 2 or 3.
Advertisement
Table of Contents
