Mitsubishi CP710E Operation Manual page 63

8. Printing procedures (Special prints)
Setting the automatic interval printing
By combining STROBE printing and MEMORY printing, automatic interval printing is available. This is the function where
the images are stored in memory at the set interval and printed repeatedly.
Automatic interval prints (1 image )
This is the function to store the image in memory page FRAME, FIELD A or FIELD B in order at set interval and
print repeatedly.
1 Set 1 image mode.
Set "MULTI : OFF/ON" to "OFF" in "3. ADDITIONAL" from the MAIN MENU.
2 Set the PAGE INC to "ON".
Set the "PAGE INC : ON/OFF" to "ON" in "6. SYSTEM" from the MAIN MENU.
3 Set the "MEM&PRINT" to "ON".
Set the "MEM&PRINT : OFF/ON" to "ON" in "1. KEY SETTING" from the MEMORY SW MENU.
Automatic interval prints (multi- image )
This is the function to store the set number of multi-images in memory page ( FRAME , FIELD A or FIELD B) in
order at set interval and print repeatedly.
1
Set multi-image mode.
Set "MULTI : OFF/ON" to "ON" in "3. ADDITIONAL" from the MAIN MENU.
2 Set the number of images in a memory page and print size
Set "MODE : SAME/DIFF/PHOTO" and "IMAGES : 2/4/16" in "3. ADDITIONAL".
• When "MODE" is set to "SAME" or "PHOTO", the image is stored and printed as the same status as 1-image memory.
• When "MODE" is set to "DIFF" and "IMAGES" to 2, 4, or 16, the images are stored in a memory page at the set interval.
• The strobe memory does not function while the images are being printed with fully memorized status. After completing
printing, memorizing and printing images starts again.
3 Set the PAGE INC to "ON".
Set the "PAGE INC : ON/OFF" to "ON" in "6. SYSTEM" from the MAIN MENU.
4 Set the "MEM&PRINT" to "ON".
Set the "MEM&PRINT : OFF/ON" to "ON" in "1. KEY SETTING" from the MEMORY SW MENU.
62
... ... ...