Table of Contents
Advertisement
Storing an image in any position
When "MODE" is set to "DIFF" and "IMAGES" to 4 or 16
1 Press the DISPLAY button to display the set conditions.
2 Press the MONITOR button. Select source image ("LIVE" is displayed on the monitor.) to display the image to be stored in
memory.
3 Press the DISPLAY button to display the set conditions.
• The memory page number where the image can be stored is indicated.
The position number where the image can be stored is indicated in red.
4 Press the shift buttons to determine the position to store the image.
5 Press the MEMORY button to store the image to be printed.
• The image is stored in the selected position.
Printing the images
1 Press the MONITOR button to display the memorized image. ("MEMORY" is displayed on the monitor.).
• When MODE is set to SAME at FIELD, press the MEMORY PAGE button to select the memorized image to be printed.
• The image in page without [ ]mark is selected. The image of selected page is displayed on the monitor screen.
• The image displayed on the monitor screen is printed.
2 Press the PRINT button.
• The memorized multi-image is printed.
Note :
• When 2 images are printed (selected "2" in IMAGES) on a L size paper, the images may not be fully printed.
In this case, adjust the position of the images by "V POSITION" of "3. PRINT SETTING" of "3. PRINT SET" in memory
SW menu. Refer to page 47.
• At 2-multi-image printing of SAME or DIFF mode, 36 letters of comment can be printed.
8. Printing procedures (Special prints)
53
Advertisement
Table of Contents
