Connection With External Equipment - Mitsubishi CP710E Operation Manual

4. Connection with external equipment

The functions of this unit can be set with the menu screens displayed on the monitor.
1 1 1 1 1 Connection with Monitors
Explains how to connect with a monitor.
2 2 2 2 2 Connection with VIDEO/S-VIDEO (Y/C separate VIDEO) signal equipment
Explains how to connect with a video signal equipment.
Explains how to connect with a S-video signal equipment.
1 1 1 1 1 Connection with Monitors
Connect this unit with a monitor to check the images to be printed and the images stored in memory.
The following example shows the connection with a video signal and a S-video signal equipment.
Connect with the necessary signal equipment.
When connecting the unit with a monitor, make sure to set the power of each equipment to "OFF".
S-VIDEO
To S-VIDEO OUT terminal
S-VIDEO ( )
To VIDEO IN terminal
To VIDEO OUT terminal
VIDEO ( )
1 2
REMOTE
VIDEO
AC LINE
VCP
To S-VIDEO IN terminal
Page 9
Page 10
Monitor
9