Mitsubishi CP710E Operation Manual page 39

7. Setting the functions (Main menu)
USER SIZE ADJ
The printing area can be changed and stored in memory as a user setting.
When selecting " USER ADJ " on the "6.SYSTEM "menu . Press the RIGHT shift button, then, USER
SIZE ADJ menu is displayed.
When pressing the SET
• When selecting " OK " and pressing the SET
COPY
Function
• When "MODE : PHOTO" is selected in "3. ADDITIONAL", "SIZE" is not displayed and setting can not be
changed.
TOP/BOTTOM/LEFT/RIGHT
Function
• Select "OK" on "CHANGE : OK/CANCEL " and press the SET
NOTE : When monochrome signal is inputted, the characters on the monitor screen may not be colored.
38
Setting the image size
SET
button after setting, " CHANGE : OK/CANCEL " is selected.
Copy "SIZE" in the " 6.SYSTEM" menu.
Display an image size set at W, M, N in the "6.SYSTEM" menu.
The selected value is displayed in TOP, BOTTOM , LEFT and RIGHT .
The value is the basis of change.
Setting the print area
By adjusting print area, the image size to be printed can be limited. Printing area adjustment can
be operated with the setting menu on the screen.
TOP ............... Top adjustment (setting area -6 to +110 )
BOTTOM ...... Bottom adjustment (setting area -110 to +6 )
LEFT .............. Left adjustment (setting area -28 to +228)
RIGHT ........... Right adjustment (setting area -228 to +28)
SET
button, SYSTEM menu is displayed.
SET
button, then, "6.SYSTEM "menu is displayed.