6. Printing procedures (Basic prints)
Selecting input signal
•
Select " VIDEO " or " S-VIDEO " according to the input signal.
•
The input signal can be set on the menu screen displayed on the monitor.
•
It is not necessary to select the input signal every time you print unless the input signal is changed.
1 Press the MENU button
• " MAIN MENU " is displayed.
2 Press the DOWN
3 Press the RIGHT
• " 2. SIGNAL SET " menu screen is displayed.
• Normally, "INPUT " is selected when opening the "2. SIGNAL SET [
on step 2. When other item is selected, press the UP
shift button to select "INPUT ".
4 Press the RIGHT
18
M E N U
.
or UP
shift button to select " 2. SIGNAL SET [
shift button.
or LEFT
shift button to select "VIDEO" or "S-VIDEO" .
] ".
] "
or DOWN