Table of Contents
Advertisement
7. Setting the functions (Main menu)
ANALOG ADJ The adjustment image of analog input signal display
• This menu is used to adjust the image of analog input signal display before storing in the memory.
• This menu is opened when pressing RIGHT
BRT (Bright )
Function
CONT (Contrast )
Function
COLOR
Function
• The each function and setting area is as follows.
Item
BRT
CONT
COLOR
CENTER
Function
• When pressing the SET
"1.COLOR ADJ " menu is displayed.
32
Adjust the brightness of printing image.
Adjust the contrast of printing image.
Adjust the color of printing image
Adjustment
Brightness
Contrast
Color
The setting value of " COLOR ADJ " is initialized.
When this function is set to " ON " , the setting value of BRT, CONT and COLOR is reset to 0.
SET
button after selecting " OK " on the lower position "CHANGE : OK/CANCEL",
shift button on "ANALOG ADJ : PUSH [
-32
Adjusting area
Darker ............................................................. Brighter
Less contrast .................................................. More contrast
Light ................................................................ Deep
] ".
+31
Advertisement
Table of Contents
