Mitsubishi CP710E Operation Manual page 32

1 1 1 1 1 COLOR ADJ
• With this menu, the color of the source image and memorized image can be adjusted.
• This menu is also displayed by pressing COLOR ADJUST
BRT (Bright )
Function Adjust the brightness of printing image.
CONT (Contrast )
Function Adjust the contrast of printing image
COLOR
Function Adjust the color of printing image
TINT
Function Adjust the tint of printing image
W•B-RED ( White balance - Red )
Function Adjust the red-subcontrast (including white) of printing image
W•B-BLUE ( White balance - Blue)
Function Adjust the blue-subcontrast (including white) of printing image
• The each function and setting area is as follows.
display
BRT
CONT
display
COLOR
TINT
display
W•B-RED
W•B-BLUE
CENTER
Function Each setting value in "COLOR ADJ" is initialized.
When CENTER is set to "ON" , the setting value of BRT, CONT,COLOR, TINT, W•B-RED and
W•B-BLUE are reset to "0".
ANALOG ADJ. (Analog Adjust )
Function Image adjustment menu of analog input signal is displayed.
When pressing RIGHT shift button
7. Setting the functions (Main menu)
Adjusting the color of the image
adjusting - 64
Brightness Darker ............................................................. Brighter
Contrast Less contrast ................................................... More contrast
adjusting - 32
Color Light ................................................................ Deep
Tint Add red ........................................................... Add green
adjusting - 16
Red-subcontrast add cyan ......................................................... add red
Blue-subcontrast add yellow ...................................................... add blue
COLOR
ADJUST
button.
adjusting area
adjusting area
adjusting area
, "ANALOG ADJ " menu is displayed.
+63
+ 31
+ 15
31