Table of Contents
Advertisement
SET
5 Press the SET
button.
• " CHANGE : OK " is selected.
When changing the size setting selected at step 4 , press the RIGHT
•
button to select " CANCEL " . Press the SET
" 4.PRINT " again.
SET
6 Press the SET
button.
• The MAIN MENU is displayed.
SET
7 Press the SET
button.
• " SAVE 1/2/3 " is selected.
•
This menu is used to store the setting in any one of 3 programs (1, 2 or 3).
8 Press the RIGHT
or LEFT
• The setting will be overlaid. When keeping the stored program, do not select the program number in which the setting is
stored.
SET
9 Press the SET
button.
• The source image (image from the input signal) is displayed.
• The selection of input signal is completed.
6. Printing procedures (Basic prints)
SET
button to select "MODE : S/L" in
shift button to select the program number 1, 2 or 3 to store the setting.
shift
21
Advertisement
Table of Contents
