Table of Contents
Advertisement
3 3 3 3 3 REAR PANEL
1
S-VIDEO
1 1 1 1 1 S-VIDEO SIGNAL INPUT/OUTPUT TERMINALS [S-VIDEO]
Use these terminals to connect this unit to S-VIDEO signal equipment.
Refer to page 10 for connection.
2 2 2 2 2 VIDEO SIGNAL INPUT/OUTPUT TERMINALS [VIDEO]
Use these terminals to connect this unit to VIDEO signal equipment.
Refer to page 10 for connection.
3 3 3 3 3 EXTERNAL REMOTE TERMINAL [REMOTE 1]
Memorizing images are available by the remote signal inputted through this terminal. When "MEM&PRINT" in the MEMORY
SW menu is set to ON, memorizing and printing images is available. It is necessary to make a circuit for remote control to
use the function.
Refer to page 64.
4 4 4 4 4 EXTERNAL REMOTE TERMINAL [REMOTE 2]
Memorizing images and printing are available by the remote signal inputted through this terminal. It is necessary to make a
circuit for remote control to use the function.
Refer to pages 65-66.
5 5 5 5 5 POWER SOCKET [AC LINE]
This socket connects to the power cord (accessory).
Insert the cord firmly.
2
3
1
REMOTE
VIDEO
5. Features and functions
4
Potential equalization connector
This is used to equalize the potential of the
2
equipment connected to the unit.
For details, refer to the installation instruction of
the equipment to be connected.
AC LINE
5
13
Advertisement
Table of Contents
