Mitsubishi CP710E Operation Manual page 25

Colour video copy processor
Table of Contents

Advertisement

6. Printing procedures (Basic prints)
2 2 2 2 2
Continuous printing
The desired number of memorized images can be printed continuously when the desired number is set before printing.
The number of prints can be changed during printing. The continuous printing also can be cancelled by setting the number of
prints to 1 during printing.
Setting the number of prints
Press the PRINT Q'TY buttons
• Press
button to increase and
• The number of prints will be switched in the order of
1
2
....
9
When "C" is selected, this unit continues printing until the print paper or ink sheet is used up.
• The set number of prints is displayed on the monitor screen.
• During continuous printing, whenever one sheet is printed, the set
number is counted down.* The number is displayed on the monitor
screen.
• After the continuous printing is completed, the set value returns to "1".
Cancelling continuous printing
When cancelling continuous printing:
A Cancelling after printing of an image is completed.
Press the PRINT Q'ty buttons
• After the image being printed is printed out correctly, the continuous printing is cancelled.
B Cancelling before printing of an image is completed
Press the STOP button on the remote control.
• The continuous printing is cancelled not completing the print, and the sheet comes out.
Changing the number of prints during printing
• When changing the number of prints during printing:
1 Press the PRINT Q'ty buttons
2 After the image being printed is printed out, press the PRINT Q'ty
Note :
If blackish image is continuously printed, the internal temperature may rise and cause the unit to switch to a standby
condition during printing.
An error message "OVER HEAT" is displayed on monitor screen.
In this case, wait until the error message goes off.
Continuous printing resumes when the temperature drops and error message goes off.
24
,
, to set the number of prints.
button to decrease the number.
10
20
30
40
50
,
, to set the number of prints to 1.
,
, to set the number of prints to 1.
100
200
C
1
* When "C" is selected, the number is not counted down.
,
buttons, to change the number of prints.
Number
of prints

Advertisement

Table of Contents
loading

Table of Contents