JUKI ACF-172-1790 Instruction Manual page 83

NO.
Presser size length (Type 5)
When type 5 of
set, input the length of the presser.
Sewing start position (Feed
direction)
Sewing start position in terms of presser
is set. Set this item when starting
position is desired to be shifted due to
overlapped section or the like.
Cloth cutting knife size
When
of cloth cutting knife is set to Effective,
input knife size used.
Function of plural motions of cloth cutting knife
Ineffective/effective
：Ineffective
Function of thread breakage detection
Ineffective/effective
：Ineffective
Needle thread trimming release
motion start distance
Distance from start of sewing to start of
trimmer release motion of needle thread
trimmer motor is inputted.
Bobbin thread trimming release
motion start distance
Distance from start of sewing to start of
trimmer release motion of bobbin thread
trimmer motor is inputted.
Counter updating unit
Unit to update sewing counter is set.
Item
Kind of presser is
Function of plural motions
Setting
range
10.0 ～ 120.0
2.5 ～ 110.0
3.0 ～ 32.0
：Effective
：Effective
0 ～ 15.0
0 ～ 15.0
82
Edit unit
0.5mm
0.1mm
0.1mm
--- ---
--- ---
0.1mm
0. １ mm
1 ～ 30 1
Initial
display
10.0mm
2.5mm
32.0mm
Ineffective
Effective
1.0mm
1.5mm
1