JUKI ACF-172-1790 Instruction Manual page 13

Button and display
NUMBER OF BUTTONHOLES
Ａ
REGISTERED
ACF PATTERN NAME display
Ｂ
KNIFE CANCEL button
Ｃ
D PRESSRER DOWN button
BOBBIN WINDER button
Ｅ
ACF PATTERN No. display
Ｆ
JUMP FEED AMOUNT display
Ｇ
SEWING ORDER display
Ｈ
MANUAL SEWING
Ｉ
CHANGEOVER button
COUNTER display
Ｊ
COUNTER CHANGEOVER
Ｋ
button
PATTERN No. display
Ｌ
FEED AMOUNT display
Ｍ
CONTENTS OF PATTERN
Ｎ
DURING SEWING
(BUTTONHOLE) display
ACF MODE AND LBH MODE
Ｏ
CHANGEOVER button
SEWING SPEED variable resistor
Ｐ
Number of buttonholes registered to ACF pattern No. being selected at
present is displayed.
Name registered to ACF pattern No. during sewing is displayed.
Every time this button is pressed down, dropping of knife and
non-dropping of knife can be changed over alternately.
Presser can be lowered and the presser down screen is displayed.
To raise the presser, press the presser up button which is displayed in
the presser down screen.
Bobbin thread can be wound.
→Refer to 1-6. WINDING BOBBIN THREAD,p.17.
ACF pattern No. during sewing is displayed.
Only when jump feed is set, the amount is displayed.
Sewing order of respective sewing patterns is displayed.
When this button is pressed down, the mode is changed to the manual
sewing mode and the manual sewing screen is displayed.
Note) Be careful since the pre-set is actuated.
Existing counter value is displayed.
Every time this button is pressed down, sewing counter and No. of pcs.
counter can be changed over.
LBH sewing pattern No. registered to ACF data is displayed.
Feed amount is displayed.
Sewing shape, cloth cutting length, width of left parallel section,
thread tension, with/without double stitching, number of times of
basting, number of stitches of LBH pattern No. being sewn at present
are displayed.
When this button is pressed down, the LBH independent sewing screen
is displayed and independent sewing is possible.
Number of rotation of sewing machine can be changed.
12
Description