JUKI ACF-172-1790 Instruction Manual page 36

Button and display
SEWING MACHINE START
Ａ
button
LBH PATTERN DATA
Ｂ
AUTOMATIC TURN button (to
return)
ACF PATTERN AND SEWING
Ｃ
ORDER display
KNIFE CANCEL button
Ｄ
LBH PATTERN DATA
Ｅ
AUTOMATIC TURN button (to
advance)
PRESSER DOWN button
Ｆ
BOBBIN WINDER button
Ｇ
STEP STITCHING button
Ｈ
NEEDLE THREAD TENSION
Ｉ
button
COUNTER VALUE CHANGE
Ｊ
button
COUNTER CHANGEOVER
Ｋ
button
CHANGEOVER OF ACF MODE
Ｌ
AND LBH MODE button
SEWING SPEED variable resistor
Ｍ
Sewing of the selected LBH pattern is started.
LBH pattern data which is used in ACF pattern data being selected at
present is automatically turned.
ACF pattern No. being selected and sewing order are displayed. LBH
pattern Nos. which are set in the displayed sewing order is in the state
of selection.
Every time the button is pressed, dropping of knife and non-dropping of
knife can be changed over alternately.
LBH pattern data which is used in ACF pattern data being selected at
present is automatically turned.
Presser can be lowered and the presser down screen is displayed.
To raise the presser, press the presser up button which is displayed in
the presser down screen.
bobbin thread can be wound.
→ Refer to 1-6. WINDING BOBBIN THREAD,p.17.
When the button is pressed, the screen of step stitching to check needle
entry point and to perform re-sewing is displayed.
→ Refer to 2-4. Performing re-sewing under LBH mode,p.39.
Needle thread tension which is set to the pattern data during sewing is
displayed, and when the button is pressed, the needle thread tension
change screen is displayed.
→ Refer to 2-9. CHANGING NEEDLE THREAD TENSION,p.58.
Existing counter value is displayed on the button, and when the button
is pressed, the counter value change screen is displayed.
→ Refer to 1-7. Using counter,p.18.
Display of sewing counter/No. of pcs. counter can be changed over.
→ Refer to 1-7. Using counter,p.18..
When the button is pressed, the ACF automatic sewing screen is
displayed and automatic sewing can be performed.
Number of rotation of sewing machine can be changed.
35
Description