JUKI ACF-172-1790 Instruction Manual page 11

Button and display
SEWING ORDER display
Ｋ
PATTERN BUTTONHOLE No.
Ｌ
INPUT button
ACF PATTERN NAME display
Ｍ
ACF MODE AND LBH MODE
Ｎ
CHANGEOVER button
JUMP FEED AMOUNT INPUT
Ｏ
button
FEED AMOUNT INPUT button
Ｐ
TURN PAGE button
Ｑ
Sewing order of the sewing data displayed on the right-hand side is
displayed.
LBH sewing data No. registered to ACF pattern being selected at
present is displayed on this button and when this button is pressed,
LBH sewing data No. can be changed.
Name registered to ACF pattern No. being selected is displayed.
→Refer to 1-11. Naming the pattern,p.30.
When this button is pressed down, LBH data input screen is displayed
and operation or setting of the single unit of the sewing machine is
possible.
→Refer to 2. OPERATION OF THE SINGLE UNIT OF SEWING
MACHINE AND SETTING PROCEDURE (LBH MODE),p.31.
Inputted jump feed amount is displayed on the button. In addition,
when the button is pressed down, the jump feed amount input screen is
displayed and edit of data can be performed. This button is displayed
only when with/without jump feed input selection of memory switch
data (level 1) is ON.
→ Refer to 2-17-2. Memory switch data list,p.80.
When this button is pressed down, the feed amount input screen is
displayed and edit of the data can be performed.
displayed only when 7 or more of the sewing patterns are registered
and it is possible to observe the sewing data not displayed on the
sewing screen.
10
Description