JUKI ACF-172-1790 Instruction Manual page 95

④ Select the communication procedure.
There are four communication procedures as
described below.
(E)Writing data from smart media to panel
(F)Writing data from personal computer
(server) to panel
(G)Writing data from panel to smart media
(H)Writing data from panel to personal
computer (server)
Select the button of communication procedure
you desire.
⑤ Select the data No.
When (I) is pressed, the writing file
selection screen is displayed.
Input the file No. of the data you desire to
write. For the file No., input the numerals of
the part xxx of VD00xxx of the file name.
Designation of the pattern No. of writing
destination can be performed in the same way.
When the writing destination is the panel,
pattern Nos. which have not been registered
are displayed 。
Designation of the LBH pattern No. of writing
destination can be performed in the same way.
When the writing destination is the panel,
LBH pattern Nos. which have not been
registered are displayed.
⑥ Determine the data No
When ENTER button
data No. selection screen is closed and the
selection of the data No. has been completed.
(K) is pressed, the
94
I
E
G
J
F
H
K